>> WIDE BELT SANDER For Metal Sheet

Precision, Speed, Safety They are all here

  • Single, contact drum head.
  • Dry sanding without need of coolant system.
  • Suitable for producing and surface finish on metal various metal sheets.
  • Powered conveyor table elevation.
  • Contact drum resists high temperature
  • Front and rear pressure rollers resist high temperature.
  • Variable feed speed on conveyor belt.
  • Feed forward and backward controls.
  • Selection of oscillation or non-oscillation of sanding belt

 

Applicable Metal Sheets:

  • Aluminum alloy
  • Aluminum
  • Various metal sheets

GC-600AEM Single Contact Drum Head

  • Working width 24" (600mm)
  • Working thickness 5" (125mm)
  • Main motor 10HP

GC-900AEM Single Contact Drum Head

  • Working width 36" (900mm)
  • Working thickness 6" (150mm)
  • Main motor 15HP
Convenient Belt Change and Tensioning
  • Quick-release head support for belt change
  • Belt tension adjustment is conveniently made by simple turning a switch.
Centralized Control Panel
  • All operation controls are grouped on a control panel for operational convenience.
  • An ammeter is provided on the control panel to indicate the percentage of full load of motor.
  • Feed forward and backward controls.
Accurate Contact Drum Adjustment (model GC-900AEM only)
A regulation knob, provided on the sanding head, is used for adjusting the parallelism of the contact drum. This combines with a dial gauge for accurately indicating the adjustment amount.
Trouble Indicator
(Patented in Taiwan and U.S.A.)
A trouble indication plate is provided under the control panel, which indicated the trouble position of the machine by various lamps. This special trouble indication design provides convenient trouble shooting.
 
Body Activated Emergency
Stop Bar
  • There is a bar placed in the position where the operator normally stands for fast and convenient shut off all operations of an emergency should occur.
Thick Limit Bar
  • In case a metal sheet thickness exceeds the allowable thickness capacity of the sander, it will touch the thickness limit bar. This causes the brake to stop the machine for safety.
Sanding Belt Oscillation Adjustment Knob
  • The oscillation adjustment knob is used for adjusting the oscillation stroke of the sanding belt.
  • Sanding belt oscillation can be adjusted to non-oscillation condition by turning the oscillation adjustment knob.
Hairline Producing or Surface Finish
  • When the sanding belt is under non-oscillation condition, the machine can produce hairlines on metal sheet surface. When the belt is under oscillation condition, the machine is suitable for normal surface finish operation.
Sensitive Sanding Belt Control
  • A photoelectric cell controls sanding belt oscillations.
  • Machine automatically stops in case of belt breakage or insufficient air pressure.
  • Cylinder speed regulation is conveniently achieved.
 
Variable Feed Speed
  • The conveyor belt speed is infinitely adjustable by turning a speed regulator knob.
  • With the variable feed speed, you can and various hardness and thickness of metal sheet.
Disc Braking Mechanism
  • This mechanism operates when various abnormal motions occur, such an sanding belt mist racking or breakage, emergency stop bar is pressed or improper sanding belt tension, etc.
  • The disc braking mechanism provides an immediate shut down of the machine motions for safety.
  • A brake indication lamp lights on to alert the operator.
Technical Data
ITEM
UNIT
GCP-600AEM
GCP-900AEM
GC-1100BEM
GC-1300BEM
Working Width
inch/mm
24/600
36/900
43/1100
52/1300
Working Thickness
inch/mm
6/150
6/150
6/150
6/150
Main Motor
HP(Std.)
10
15
20
25
HP(Max.)
15
20
25
30
Feed Motor
HP
1
2
3
3
Hoist Motor
HP
1/2
1/2
1/2
1/2
Sanding Belt Size
inch
25" x 60"
37"x 60"
43" x 75"
52" x 75"
Sanding Belt Speed
m/sec
15 / sec
15 / sec
15 / sec
15 / sec
FT/sec
49 / sec
49 / sec
49 / sec
49 / sec
Feed Speed
m/sec
4-16
4-16
4-16
4-16
m/set
13-52
13-52
13-52
13-52
Compressed Air at 70 psig Consumed
cbm/hr
0.5
0.75
0.75
0.75
Dust Exhausted Outlet
inch
4
4x2 hole
4
4x2 hole
mm
101
101x2 hole
101
101x2 hole
Net Weight
kgs
720
900
1100
1400
Gross Weight
kgs
770
1100
1300
1600
Packing Size (LxWxH)
inch
47"x 57" x 76"
66" x 60" x 76"
73" x 62" x 78"
87" x 68" 85"
Standard Accessories: Optional Accessories:
  • Sanding belt
  • Motor
  • Service tools and tool box
  • Instruction manual
  • Dial gauge
  • Pressure rolls
  • Panel cleaning brush
  • Air jet cleaner for cleaning and cooling the running abrasive belt
  • Extension rollers for infeed or output. The extension length is 12"/300 mm. standard
  • Digital indicator.