>> Lacquered Panel Wide Belt Sander

 

GREATLY IMPROVE YOUR COMPETITIVE EDGE WITH THE BEST IN LACQUERED PANEL SANDERS
The GOIGN.E Lacquered Panel Wide Belt Sander is specially designed for the finishing of lacquered panels, thin wooden slices and solid wood sanding. These sanders are constructed with specially-designed, full rubber contact drums, an infinitely variable abrasive belt speed controlled by high performance transistor inverter, an oscillating blower for abrasive belt cleaning and a panel cleaning brush for cleaning the workpieces. The lacquered panel sanders are built with a single head configuration, with a choice of width capacity from 24" to 48".
 

SANDING DRUM HEAD
 
 

FLOATING TABLE
The floating function of the conveyor table allows for sanding panels with thickness variation of 0.6 mm.

FULL RUBBER CONTACT DRUM
 The full rubber contact drum is of a special design which is particularly good for lacquered panels.

CONVENIENT BELT CHANGE AND TENSION ADJUSTMENT
By simply turning a lever, the belt tension can by easily adjusted. Fast and convenient belt replacement is achieved as the sanding head is equipped with a quick release function.

CENTRALIZED CONTROL PANEL
All operational controls are grouped for easy operation. An ammeter is provided on the control panel to indicate percentage of full motor load.

CENTRALIZED CONTROL PANEL (OPTIONAL)
All operational controls are grouped for easy operation. An ammeter is provided on the control panel to indicate percentage of full motor load. The optional digital indicator for thickness setting provides more operational convenience.

INFINITELY VARIABLE FEED SPEED
This machine is ideally suited for lacquered panel sanding because of the infinitely variable belt speed. A transistor inverter is fitted on the machine which controls the abrasive belt speed.

PANEL CLEANING BRUSH
As dust accumulates on workpieces, the cleaning brush will remove it. It is located over the outfeed conveyor.

OSCILLATING BLOWER
Dust is efficiently removed from the abrasive belt using the oscillating blower which is located above the idle roller.

VARIABLE SPEED RATE
By simply turning the speed selector knob, the feed rate can be conveniently adjusted. The machine is suitable for sanding a wide range of materials as the conveyor feed speed rate is infinitely adjustable.

DISK BRAKE MECHANISM
This mechanism operates when the body-activated emergency stop bar is pushed or in the event of any belt problems like mistracking or breakage. It provides an immediate and instant shut down of all machine motions.

CONVENIENT THICKNESS
MEASURING DEVICE
Simply place a workpiece on the sample rest. Press the table elevation button and when the workpiece touches the limit switch, the thickness will be measured and displayed.
 
STANDARD ACCESSORIES:
  1. Sanding belt
  2. Motors
  3. Pressure bar and rollers
  4. Electric dust cleaning brush for cleaning workpieces
  5. Air jet cleaner for clearing and cooling the running abrasive belt
  6. Service tools and tool box
  7. Instruction manual
  8. Dial gauge
OPTIONAL ACCESSORIES:
  1. Extension rollers for infeed. The extension length is 12" (300 mm.) standard.
  2. Extension rollers for outfeed. The extension length is 12" (300 mm.) standard.
  3. Digital indicator.
 
SPECIFICATIONS:
ITEM
UNIT

C-660S

C-675S

C-960S

C-975S

C-1175S

C-1184S

C-1375S

C-1384S
Working Width
inch
/mm
24/600
24/600
36/900
36/900
43/1100
43/1100
52/1320
52/1320
Working Thickness
inch
/mm
6/150
6/150
6/150
6/150
6/150
5/125
6/150
5/125
Main Motor
HP
10
10
15
15
15
15
20
20
Feed Motor
HP
2
2
2
2
2
3
3
3
Hoist Motor
HP
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
Sanding Belt Size
inch
25 x 60
25 x 75
37 x 60
37 x 75
43 x 75
43 x 84
52 x 75
52 x 84
Sanding Belt Speed
m/sec
ft/sec
0-15/0-49
0-15/0-49
0-15/0-49
0-15/0-49
0-15/0-49
0-21/0-69
0-15/0-49
0-21/0-69
Conveyor Belt Size
inch
/mm
24 x 92
610 x 2340
24 x 92
610 x 2340
36 x 92
915 x 2340
36 x 92
915 x 2340
43 x 92
1100 x 2340
43 x 110
1100 x 2800
50 x 92
1270 x 2340
50 x 110
1270 x 2800
Feed Speed
m/sec
ft/sec
4-16
13-52
4-16
13-52
4-16
13-52
4-16
13-52
4-16
13-52
6-24
20-80
4-16
13-52
6-24
20-80
Contact Drum Dia.
mm
185
185
185
185
185
280
185
280
Compressed Air at
70 PSIG Consumed
CBM/hr
1
1
1
1
1
2
1
2
Dust Exhaust Outlet
inch
/mm
4 x 6 holes
101 x 6 holes
4 x 6 holes
101 x 6 holes
4 x 6 holes
101 x 6 holes
4 x 6 holes
101 x 6 holes
4 x 6 holes
101 x 6 holes
6 x 6 holes
150 x 6 holes
4 x 6 holes
101 x 6 holes
6 x 6 holes
150 x 6 holes
Net Weight
kgs
850
1000
950
1150
1500
2800
1850
3500
Gross Weight
kgs
1000
1200
1150
1350
2000
3000
2350
3800
Packing Size
L
inch
64
64
64
64
80
83
89
90
W
55
55
68
68
70
76
70
85
H
78
85
78
85
85
89
85
89